Conductivity and TDS Meters: HI 9033
Remember to purchase the Conductivity Standard to calibrate. We recommend 12,880µS for this instrument, link at the bottom.
*Product Manual Below*
Waterproof Multi-range Conductivity Meter
- Ideal for wet, humid, dusty or muddy conditions
- 4 ranges of measurement with one probe
- Battery Error Prevention System (BEPS)
HI 9033 and has been proven time and again to hold up under extended use in wet, humid, dusty and muddy conditions. HI 9033 utilizes a single probe to perform all conductivity readings in four ranges. This allows the user to measure samples from deionized water to brine without having to switch or recalibrate the probe. Both meters perform measurements with ATC (automatic temperature compensation) which adjusts for the effects of temperature. These portable instruments also feature BEPS (Battery Error Prevention System) technology that alerts the user when low batteries could affect the readings.
HI 9033 is supplied complete with HI 76302W probe with internal temperature sensor and 1 m (3.3’) cable, calibration screwdriver, battery, rugged carrying case and instructions.
|
Specifications:
|
|
|
|
Range
|
|
0.0 to 199.9 µS/cm, 0 to 1999 µS/cm, 0.00 to 19.99 mS/cm, 0.0 to 199.9 mS/cm
|
|
Resolution
|
|
0.1 µS/cm, 1 µS/cm, 0.01 mS/cm, 0.1 mS/cm
|
|
Accuracy (@20°C/68°F)
|
|
1% of Full scale
|
|
Calibration
|
|
Manual
|
|
Temp. Compensation
|
|
Automatic
|
|
Probe
|
|
HI 76302W
|
|
Battery Type / Life
|
|
1 x 9V/ approx. 100 hours of continuous use
|
|
Environment
|
|
32 to 122°F (0 to 50°C)
|
|
Dimensions
|
|
7.7 x 3.1 x 2.4" (196 X 80 X 60mm)
|
|
Weight
|
|
3.1 lb (1.4 Kg)
|
HI 9033 Manual (0,52 MB)
|
Conductivity Testers 
